Cycling efficiency is not one magic cadence. It is the ability to produce the required power with a rhythm, resistance, posture, and pedal action that can be sustained. These class sessions use cadence changes and short single-leg drills to help triathletes become more aware of leg speed, resistance, and stability on the bike.
Cycling Sessions at a Glance
- Session 1: cadence ladder from 95 toward 115 RPM and back down.
- Session 2: cadence progression, light single-leg coordination drills, and 2-minute harder intervals.
- Primary skills: cadence control, resistance selection, quiet upper body, and repeatable effort.
- Key principle: cadence targets are class drills—not universal “best cadence” prescriptions.

Cadence: RPM Is a Training Variable
Cadence is the number of crank revolutions completed per minute. A rider can produce the same external power using different combinations of cadence and torque, so cadence changes how the work feels and how force is distributed.
Higher cadence is not automatically more efficient, and lower cadence is not automatically stronger. Body size, power, terrain, gearing, experience, event demands, and individual preference all matter.
Stable Does Not Mean Rigid
As cadence rises, riders may begin bouncing in the saddle or adding unnecessary upper-body motion. Use enough trunk control to keep the pelvis and torso organized while keeping the shoulders, elbows, hands, and grip relaxed.
- Choose resistance that keeps the pedals under control.
- Avoid chasing an RPM number that causes bouncing or loss of position.
- Keep breathing regular instead of bracing excessively.
- Adjust the bike setup before blaming every discomfort on technique.
Cycling Session 1: Cadence Ladder
Warm-up: 8 minutes easy to moderate. The original class used roughly 120–130 bpm as one group reference, but heart-rate response is individual and that range is not a universal target.
Pre-set: 3 × 1 minute at increased resistance around 90–95 RPM with 1 minute easy between efforts.
Main drill: 1-minute cadence steps at approximately 95, 100, 105, 110, and 115 RPM, then work back down. Reduce resistance if needed to maintain control.
Goal: feel how cadence and resistance interact while keeping a stable position.
Cycling Session 2: Cadence + Coordination + Tempo
Warm-up: 8 minutes easy.
Pre-set: 5 × 1 minute progressing from about 95 toward 115 RPM at manageable resistance.
Drill set: short left-leg/right-leg coordination periods followed by normal two-leg pedaling. Keep resistance light and the drill brief.
Main set: 3 × 2 minutes at a strong, sustainable effort around 95–100 RPM with 2 minutes easy recovery.
Cooldown: about 5 minutes easy.
What Single-Leg Pedaling Is—and Is Not
On an indoor trainer, brief single-leg pedaling can be used as a coordination exercise because it makes uneven spots in the crank cycle easy to feel. It does not prove that a rider has a dangerous “imbalance,” and the goal is not to consciously pull up hard through the entire pedal circle.
- Use light resistance.
- Keep the drill short.
- Focus on a controlled crank cycle rather than maximum force.
- Return to normal two-leg pedaling and see whether the movement feels smoother.
If a rider develops persistent knee, hip, or back pain, bike setup, training load, and other causes should be considered rather than assuming cadence alone is responsible.
Key Takeaways
- Cadence is a variable to practice, not a universal score to maximize.
- Resistance should be adjusted so the target cadence remains controlled.
- A stable torso and relaxed upper body help reduce unnecessary motion at higher RPM.
- Short single-leg drills are coordination practice, not a diagnosis of asymmetry.
- Hard intervals should be separated by enough recovery to repeat the intended quality.
For Class
After these sessions, you should be able to:
- Define cadence in RPM.
- Explain the relationship between cadence and resistance.
- Recognize when cadence is too high for your current control.
- Use a brief single-leg drill as a coordination exercise.
- Journal cadence, effort, resistance, and technique observations.
Used in College Coursework
These indoor cycling sessions are used in Binghamton University Health and Wellness Studies triathlon coursework to teach cadence, effort regulation, and movement awareness.
